Product Categories
(Total 8 Products for Adapter Sleeves H300 Series)
Adapter Sleeves H300 Series are suitable for locating bearings with a tapered bore into cylindrical seating as they can be used on smooth or stepped shafts. Metric Shaft Adapter H300 Series are easy to mount and require no additional location on the shaft.Bearing Adapter Sleeves H300 Series are using for locating...
Adapter Sleeves H200 Series are easy to install and require no additional location on the shaft:When used on plain shafts, the bearing can be located at any position on the shaft.When Metric Shaft Adapter H200 Series used on stepped shafts together with an L-shaped spacer ring, the Bearing Adapter Sleeves H200 Series...
Adapter Sleeves H2300 Series are suitable for locating bearings with a tapered bore into cylindrical seating as they can be used on smooth.Metric Shaft Adapter H2300 Series are suitable when bearings with a tapered bore are to be located onto a cylindrical shaft. Bearing Adapter Sleeves H2300 Series is pressed into...
Adapter Sleeves H3000 Series serve to mount and remove bearings with tapered bores onto cylindrical shafts. Metric Shaft Adapter H3000 Series are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock...
Adapter Sleeves H3200 Series serve to mount and remove bearings with tapered bores onto cylindrical shafts. Bearing Adapter Sleeves H3200 Series are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch.Extraction sleeves are suitable when bearings...
Adapter Sleeves H3100 Series serve to mount and remove bearings with tapered bores onto cylindrical shafts. The tapered sleeve is pressed into the bearing bore until the reduction in radial clearance is achieved, enabling dismantling.Bearing Adapter Sleeves H3100 Series are suitable when bearings with a tapered bore...
Adapter Sleeves AH/AHX2300 Series
Adapter Sleeves AH/AHX2300 Series can be used when welding cables smaller than indicated on mold tag.Metric Shaft Adapter AH/AHX2300 Series slide over the cable to adapt smaller size cables to a larger size mold.Threads located on the end of the tapered sleeve are used in conjunction with a nut to push the bearing up...
Adapter Sleeves AH/AHX3000 Series
Adapter Sleeves AH/AHX3000 Series can be used when welding cables smaller than indicated on mold tag.Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place. SLEEVE d1 D1 L L1
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.