Model No.: GEG-ET-2RS Series
Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF
Spherical Bearings are used in countless applications, wherever rotational motion must be allowed to change the alignment of its rotation axis. A good example is the drive axle bearings of a vehicle control arm (or A-arm) suspension. The mechanics of the suspension allow the axle to move up and down (and the wheel to turn in order to steer the vehicle), and the axle bearings must allow the rotational axis of the axle to change without binding.
Radial Spherical Plain Bearings GEG-ET-2RS Series have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface.
Their design makes Radial Spherical Bearings GEG-ET-2RS Series particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be accommodated, or where oscillating or recurrent tilting or slewing movements must be possible at relatively slow sliding speeds, often accompanied with heavy loads.
Bearing Designation | Dimensions(mm) | Load Rating(KN) | Weight | |||||||
d | D | B | c | dk | rs | r1s | Cr | Cor | ≈Kg | |
GEG15ET-2RS | 15 | 30 | 16 | 10 | 25 | 0.3 | 0.3 | 32 | 64 | 16 |
GEG17ET-2RS | 17 | 35 | 20 | 12 | 29 | 0.3 | 0.3 | 45 | 90 | 19 |
GEG20ET-2RS | 20 | 42 | 25 | 16 | 35.5 | 0.3 | 0.6 | 85 | 170 | 17 |
GEG25ET-2RS | 25 | 47 | 28 | 18 | 40.7 | 0.6 | 0.6 | 110 | 220 | 17 |
GEG30ET-2RS | 30 | 55 | 32 | 20 | 47 | 0.6 | 1 | 140 | 280 | 17 |
GEG35ET-2RS | 35 | 62 | 35 | 22 | 53 | 0.6 | 1 | 175 | 350 | 16 |
GEG40ET-2RS | 40 | 68 | 40 | 25 | 60 | 0.6 | 1 | 225 | 450 | 17 |
GEG45ET-2RS | 45 | 75 | 43 | 28 | 66 | 0.6 | 1 | 275 | 550 | 15 |
GEG50ET-2RS | 50 | 90 | 56 | 36 | 80 | 0.6 | 1 | 430 | 860 | 17 |
GEG60ET-2RS | 60 | 105 | 63 | 40 | 92 | 1 | 1 | 550 | 1100 | 17 |
GEG70ET-2RS | 70 | 120 | 70 | 45 | 105 | 1 | 1 | 705 | 1410 | 16 |
GEG80ET-2RS | 80 | 130 | 75 | 50 | 115 | 1 | 1 | 860 | 1720 | 14 |
GEG90ET-2RS | 90 | 150 | 85 | 55 | 130 | 1 | 1 | 1070 | 2140 | 15 |
GEG100ET-2RS | 100 | 160 | 85 | 55 | 140 | 1 | 1 | 1150 | 2300 | 14 |
GEG110ET-2RS | 110 | 180 | 100 | 70 | 160 | 1 | 1 | 1680 | 3360 | 12 |
Spherical Bearings GEG-ET-2RS Series is a bearing that permits angular rotation about a central point in two orthogonal directions (usually within a specified angular limit based on the bearing geometry). Typically these bearings support a rotating shaft in the [bore] of the inner ring that must move not only rotationally, but also at an angle.
Product Categories : Spherical Plain Bearings > Radial Spherical Plain Bearings